Fence Company Terms Explained: A Plain-English Glossary
If you're reading fence quotes and hitting words like "post hoe" or "picket exposure," this page is for you. This fence company glossary explains the terms Akron homeowners meet when they compare materials, read estimates, and talk with installers. Each entry gives you a plain definition first, then tells you why the term matters to your project and your budget. Use it to read a fence quote line by line and ask better questions before anyone digs a hole.
- Fence Post: the upright that holds everything up
- Post Hole: the dug hole the post sits in
- Frost Line: how deep the ground freezes
- Concrete Footing: the concrete anchor around a post
- Rail: the horizontal backbone of a fence
- Picket: the vertical boards you see
- Privacy Fence: a solid fence that blocks sightlines
- Chain Link: woven wire fencing on metal posts
- Split Rail: open rustic fencing with stacked rails
- Ornamental Fence: decorative metal fencing, usually aluminum
- Gate Hardware: hinges, latches, and locks for gates
- Property Line: the legal boundary of your lot
- Setback: how far a fence must sit from a boundary
- Fence Permit: city approval before you build
- Utility Locate (Call 811): marking buried lines before digging
- Linear Foot: how fencing is measured and priced
- Fence Estimate: the written price for your project
- Tear-Out: removing the old fence first
Parts of a Fence: What Every Fence Company Glossary Covers
These are the pieces an installer names when walking your yard. Knowing them helps you picture what each line of a quote actually buys.
Fence Post
A fence post is the vertical support that anchors a fence to the ground and carries its weight. Posts are the most important part of any fence; if they fail, the whole fence leans or falls. In Akron's clay-heavy soil, posts need to be set deep and solid because clay shifts as it freezes and thaws. If a quote mentions post depth or post spacing, that is a good sign the installer is thinking about longevity, not just looks.
Post Hole
A post hole is the hole dug into the ground to hold a fence post, usually filled with concrete or packed gravel around the post. The depth and width of the hole decide how stable the fence will be over time. Shallow holes are a common shortcut that leads to leaning fences a few winters later. Ask any installer how deep they dig and what they backfill with.
Frost Line
The frost line is the depth below the ground surface where soil stops freezing in winter. Posts set above the frost line can get pushed upward as frozen ground expands, a problem called frost heave. In Northeast Ohio, freeze-thaw cycles are a real factor, so posts should be set below the frost line to stay put. A fence company that talks about the frost line is planning for your fence to survive more than one winter.
Concrete Footing
A concrete footing is the concrete poured around a fence post inside its hole to lock it in place. Concrete gives the post a wide, heavy base that resists wind, gate weight, and shifting soil. Not every fence needs concrete at every post, but gate posts and corner posts almost always do. If your quote lists concrete per post, you can see exactly where the installer plans to use it.
Rail
A rail is the horizontal board or bar that runs between posts and supports the pickets or panels. Most wood and vinyl fences use two or three rails depending on height. More rails mean a stiffer fence that resists sagging. On a split rail fence, the rails are the whole fence; they stack between posts with open space in between.
Picket
A picket is one of the vertical boards or slats attached to the rails, the part of the fence you actually see. Picket width, spacing, and style set the look of the fence and how much privacy it gives. A picket fence spaces them apart for an open, classic look; a privacy fence butts them tight together. When a quote mentions "picket exposure" or spacing, it is describing the gap between boards.
Fence Types and Materials: Your Glossary to Different Styles and Options
Walk through any fence company glossary and most of the terms are style names. Here are the ones you'll meet shopping in the Akron area.
Privacy Fence
A privacy fence is a solid fence, usually six feet tall, built with boards or panels placed tight together so no one can see through it. Homeowners choose privacy fences for backyards, pools, and patios. Wood and vinyl are the common materials; wood costs less up front, while vinyl needs less upkeep. Height limits for privacy fences vary by city, so check your local rules before you pick a height.
Chain Link
Chain link is fencing made from woven steel wire stretched between metal posts and rails. It is one of the most affordable ways to secure a yard or contain a dog, and it holds up well to weather. Chain link does not block sightlines, so it is a security choice, not a privacy choice. Vinyl-coated chain link softens the look and resists rust better than bare galvanized wire.
Split Rail
A split rail fence is an open fence made of wooden rails stacked horizontally between posts, with large gaps between rails. It marks a property line with a rustic look at a lower material cost than a solid fence. Split rail works for larger lots and decorative boundaries, and you can add wire mesh behind it to keep pets in. It will not give you privacy or stop a determined climber.
Ornamental Fence
An ornamental fence is a decorative metal fence, usually aluminum today, built from vertical pickets and horizontal rails in a classic wrought-iron style. Aluminum ornamental fencing will not rust, which matters in a wet freeze-thaw climate like Akron's. It suits front yards, pool enclosures, and anywhere you want security without blocking the view. It costs more than chain link but keeps its look with little maintenance.
Gate Hardware
Gate hardware means the hinges, latches, locks, and closers that let a gate swing, shut, and stay shut. A gate gets more wear than any other part of a fence, so hardware quality matters. Self-closing hinges and self-latching latches are standard around pools and often required by local rules. If a quote itemizes gate hardware, check whether the latch is lockable if that matters to you.
Property, Permits, and Prep
These terms cover what happens before a shovel hits the ground. They are where most surprises hide.
Property Line
A property line is the legal boundary between your lot and your neighbor's, recorded in county property records. Building a fence on or over the line can create disputes and may force you to move the fence later. On Akron's older platted city lots, the line is not always where the old fence or hedge sits. When in doubt, a survey settles it before installation starts.
Setback
A setback is the minimum distance a fence or structure must sit from a property line, street, or sidewalk under local rules. Setback rules differ between older city neighborhoods and newer suburban developments. A fence placed inside the setback may need to come down, so this is worth confirming before you sign anything. Your installer should ask about setbacks when planning the fence line.
Fence Permit
A fence permit is written approval from your city or township to build a fence at a certain height and location. Many municipalities require one, especially for taller fences or corner lots. Skipping a required permit can mean fines or tearing out finished work. Ask who pulls the permit, you or the installer, because the answer affects both the timeline and the quote.
Utility Locate (Call 811)
A utility locate is the free service, reached by calling 811, that marks buried gas, water, and electric lines before anyone digs. Post holes go two to three feet down, deep enough to hit a buried line. The law requires a locate before digging, and the colored flags or paint in your yard are the result. A fence installer who schedules the 811 call without being asked is doing the job right.
Tear-Out
Tear-out means removing and hauling away an existing fence before the new one goes in. Old posts set in concrete take real labor to pull, so tear-out usually shows up as its own line on a quote. If your estimate does not mention removal and you have an old fence, ask whether it is included. Some homeowners remove the old fence themselves to trim the cost.
Pricing and Paperwork
Linear Foot
A linear foot is a straight-line measurement of length, and it is how most fencing is measured and priced. A quote priced per linear foot multiplies your fence's total length by a rate that covers materials and labor. Gates, corners, and slopes add cost beyond the per-foot rate. Knowing your rough footage before you call helps you compare quotes fairly; our guide to fence installation cost walks through the other factors that move the number.
Fence Estimate
A fence estimate is a written statement of what a fence project should cost based on measurements, materials, and site conditions. A clear estimate lists the fence type, height, footage, number of gates, post setting method, and whether tear-out is included. Vague one-line estimates make comparison impossible and leave room for surprise charges. A fence company willing to walk you through each line is showing you how they work, not just what they charge. If you're comparing installers in Cuyahoga Falls or Barberton, get every estimate in writing first.
Using This Fence Company Glossary
You can now read a fence quote line by line and know what each item means, from post depth to tear-out. This glossary gives you the vocabulary to ask sharper questions: how deep are the posts set, who calls 811, is removal included, and where exactly does the property line sit. Clear questions get clear answers, and clear answers make for a fence you won't think about again for years.
If you need fence installation, Akron Fence Co can help.
Prefer to talk it through? Call (330) 302-2470 — a quick call is usually the fastest way to get a straight answer for your situation.